超级马里奥能量补给衣架

Supermario power-up coat hanger star/mushroom (multicolor)

2024-04-09 03:04:18

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

I really liked the original Pikachu/mushroom powerup hanger, but got into much trouble having it work properly. Also I wanted a multicolor model, so I ended up making a new one from scratch, using a lever instead of gears, which is less sensitive to print quality.

You also need 3x M3 screws of 5-10mm to finalize the assembling. And of course a basic screw to put into you wall.

Enjoy !

Print Settings

Printer brand:
Tizyx
Printer:
Tizyx Evy
Rafts:
No
Supports:
No
Resolution:
0.4mm nozzle - 0.2mm layer
Notes:
The UCP files are pre-setup for a proper printing, especially to minimize the seam visibility.
You can achieve all the colors with a dual-color printer + making the appropriate filament changes when required. In this case you may have to print elements separately. If you have a 4-color printer, that's even easier :) Just ungroup the elements and set the proper color to each model.

No support is required ! All the models are designed to be printable in the orientation they are provided.

After printing, it is a good idea to slightly sand the parts in contact with each other. They should slide smoothly.