忍者之影：战斗机械

Shugenja Battlemech

2024-04-09 04:02:12

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

General Updates:
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++

Based on Battletech's Shugenja Battlemech

Contains both .blend, .stl and baseless (B-).stl files for the Shugenja 7D and 8H. Use .Blend files to customise the pose or the base file to make a custom variant.

I use a resin printer so I do not know how well it will work if a filament printer is used, but always make sure parts are supported. For resin printing, a lift height of 8mm above a platform allows for full drainage out of the hexbase.

You can request if you want me to make a specific miniature (although there is no timeline on when it will be completed), or support at the second tier or higher on the Patreon for a custom design.

++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++

Tags

battletech miniature wargaming

License

CC BY-NC-SA

Shugenja Battlemech
by UnrestedGuy is licensed under the Creative Commons - Attribution - Non-Commercial - Share Alike license.

忍者之影：战斗机械

朋友，你觉得上面这个模型，属于下面的哪个分类？

上面没有我要的选项

必须全中文，且长度不超过15

相关内容

猜你喜欢

联系我们

邮箱: 289047960@qq.com

热门推荐

最热下载

GMX曲线支架支持GoPro安装（或轻型结构）
2023-05-22
SATA male THT 15-pin right-angle ATX power connector (3D files, f3d file, and KiCad files included)
2023-08-02
篝火（Bonfire）收纳盒 / 插槽整理架（含扩展包）
2024-04-12
适用于ebyte E104-BT5040U USB适配器的外壳
2024-04-28
原神优菈
2025-06-27

最新模型