平板式拖车模型：Traxxas TRX4M专用设计

Flatbed Trailer for Traxxas TRX4M

2024-04-09 06:27:20

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

This is a multi piece flatbed trailer for the Traxxas TRX4m and possibly other small rc vehicles but I have not tried it on any others yet. I used mine to haul a 1/28th scale drift truck with my Bronco.

Required hardware: 2x M3x10 screws for the gooseneck, 2x M3x16 screws for the wheels, 2x traxxas utility trailer wheels or similar, washers or spacers for the wheels as needed to not have rub, mine is spaced about 7mm.

The files for the accessories on my trailer aren't my own, the jerry can is by RUNMERIDIAN on Cults 3d, and the fire extinguisher is by Bartlby76 on Thingiverse

Print Settings

Printer brand:
Sovol 3D
Printer:
Sovol SV01PRO
Rafts:
Doesn't Matter
Supports:
Yes
Resolution:
0.2
Infill:
25% Gyroid
Filament brand:
Creality Ender
Filament color:
Black
Filament material:
PLA
Notes:
I would recommend for the support to use tree style so its easier to remove from the square slot in the front of the trailer.

For mounting the gooseneck to the flatbed ive left about a 0.1m tolerance gap on each side and after trimming the support material away it fits perfect with mine.

I printed the wheel chocks in TPU and mounted them with Velcro but they would work fine in PLA and they're optional as well, I did it for scale and security since I had the smaller truck coming off the trailer on modest inclines.