塔摩恩 70-180mm F/2.8防抖锁定镜头3D模型

Tamron 70-180 F2.8 Zoom Lock.

2024-04-09 08:53:29

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

This is a simple lock ring that snaps in between the gap in the barrel extension that keeps the lens locked at 180mm and prevents any creep from happening.

Please note that this is for the original version of the lens, meaning NOT THE G2. I do not have the G2 therefore I cannot verify that the extension length, barrel diameter, or the design is compatible.

Print with any .2 or .3 mm setting.

The part shown in the picture is printed in PETG.

V1: Original Design but the cutout isn't really big enough to slot in without breaking a couple of inner walls.

V2: Updated design with a much bigger gap to allow the part to snap onto the lens better.

Print Settings

Printer brand:
Voxelab
Printer:
Aquila X3
Rafts:
Doesn't Matter
Supports:
No
Resolution:
0.27
Filament brand:
OVERTURE
Filament color:
Grey
Filament material:
PETG
Notes:
I used 3+ walls to make the entire part just the outer and inner walls. Printed so that the curves are on the x and y axes.