ND 三元飞行器

ND Miata Canards

2024-04-09 09:52:11

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

Want your front end to look cool but dont want to dish out a ton of money? Want something sleek, stylish, and feel a since of accomplishment because who doesn't like a cool DIY?

Great! I have the solution for you. With my awesome, super sleek, and absolutely killer new canard design you'll be the one getting the curious look at the car show.

Printed the canards using a Carbon fiber/PLA filament to test strength and resistance to heat. Had a thinner design originally but it warped due to heat and used standard PLA. Due to their length I printed them vertically with the flat surface aligned with build plate.

The top and bottom canard have the same rate of curvature for the body. Technically, if you wanted, you can play with the configuration of where you want the canard (top/bottom) or which one you want to use. The bottom canard is a wider variant to match the profile of the top canard.

You can check the photos of the canards on the car here: https://www.instagram.com/p/C5hdePHuZ5u/?utm_source=ig_web_copy_link&igsh=MzRlODBiNWFlZA==