3D广播模板设计

Telecaster template

2024-04-10 17:32:03

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

This is a (router) template for a Telecaster. The construction is made so that it can be printed on my Ender S1 Pro with measurements 220mm × 220mm × 270 mm.
All the measurements are according to the Telecaster Template found at Electric Herald: https://www.electricherald.com/fender-telecaster-templates/

The chambers in the template are for routing a Thinline body, and in this first version is filled with F-holes for a Thinline.

Note that this is an early version so there may be changes coming up when construction has been tested more.

PLEASE let me know in the comments if you've used it and if it needs any changes or if you have ideas for upgrades.

Note that I've printed it using PLA with enough infill so that it won't warp (use build plate adhesion if necessary for you).
Otherwise I don't think print settings really matters. The small elephants foot I got was easily sanded out.

Print Settings

Printer brand:
Creality
Printer:
Ender-3 S1 Pro
Rafts:
Doesn't Matter
Supports:
No
Notes:
Use build plate adhesion if necessary for you to avoid warping.
I used 25% infill to avoid warping, but if you can get away with less then good for you.