Aruba 500系列AP原厂安装架

Aruba 500 Series AP OEM Mounting Bracket

2024-04-10 17:33:22

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

The 500 series Aruba APs come with a pre-installed mounting bracket. Some mounts require the removal of this bracket, and as such, it can get lost. This is a direct replacement for that OEM mount. I was only able to test the mount points on an AP-515 and included the other sets of holes for the 505 and other APs that use the other mount holes. If they don't line up, feel free to comment and I can adjust it. Alternatively, feel free to remix the design.

The screw holes are meant for M4 screws as that what threads into the AP, and I sized the recessed part to match the heads of my particular screws (7mm x 2.5mm).

Print Settings

Printer brand:
VoronDesign
Printer:
Voron2 350
Rafts:
No
Supports:
No
Resolution:
.20
Infill:
100%
Filament brand:
Polymaker
Filament color:
Black
Filament material:
ASA
Notes:
PLA would likely be fine for this as well, however the APs can run hot. Keep in mind the mounting location and AP heat when choosing a filament.

Print vertically and with a brim