3D模型油漆存储插入装置

Model Paint Storage Insert

2024-04-10 17:33:22

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

This model is a storage tray insert for holding miniature model paints in dropper bottles. It fits Army Painter, Vallejo and D&D paints, but will work for any dropper bottle with an approximately 25mm diameter.

I bought some of these Bamboo trays,
https://www.amazon.com/gp/product/B07QL3NSTJ
because they perfectly fit 4x14 bottles of paint, and they perfectly fit in my Ikea Besta cabinets. However, moving the tray around caused all of the bottles to fall over. This insert solves that problem.

There are two versions of the model. One is for storing bottles right side up, and the other is for storing bottles upside down. I know some people like to store them that way because it's easier to see the paint colors in the bottom of bottle.

I've included the parameterized Fusion 360 file so you can print these in different sizes. Just change the UnitsWide and UnitsLong parameters to print in any size you need!

The 4x14 model is over 14 inches long, so I printed it on an Anycubic Kobra Max. If your printer doesn't have a bed that large, you can print the smaller models and put them in the tray in sections. I didn't go to the extra effort of adding a half post at the end though, so you will have one pair of rows with no post. To be honest, you might be better off splitting the full size STL in half and printing that instead.

The Fusion 360 file has the Lid Stand features Suppressed for the normal right-side-up bottles. To include the lid stands, just un-suppress those last 5 features.