ICS SA80枪托

ICS SA80 buttstock

2024-04-10 18:28:17

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

This is a buttstock/buttpad for the airsoft sa80 replicas made by ICS. I've made these because i wanted to create a full black L85 for my own use. Because i couldn't find any online i want to make this publicly available for anyone to use or modify.

I designed it in a way where you do have to use it with one of those metal inserts found in original ICS buttstocks. I sacrificed an old one of mine and used it for the 3D printed one.

I hope you like it!

Print Settings

Printer brand:
Prusa
Printer:
i3 MK4
Rafts:
No
Supports:
Yes
Resolution:
as detailed as you can go
Infill:
10% or more
Filament brand:
prusa
Filament color:
petg cf
Filament material:
petg
Notes:
It would be good to add extra perimeters for a thicker wall.

Make sure to print it in the same orientation with organic supports seen in the image above.

Post-Printing

Cleaning up the print by removing the brim and supports might be a bit tedious. As long your top contact is set correctly for a detachable support you should be alright.

After they're all taken care off you will have to take one of the metal inserts of an official ics buttstock for the l85 and install it into the 3D print.
If anyone has questions on this i might make some pictures to explain how to do this. You will still be able to insert them back into your original buttstock as long you don't wreck the soft plastic when taking out the metal insert.

How I Designed This

I started designing the rough dimensions in tinkercad and finished it off in blender to add the details. I designed it in a way where it reuses the metal insert that's found inside the original ICS buttpad for the L85