Elegoo Phecda 蜂窝结构的脚连接器
Foot connectors for Elegoo Phecda Honeycomb
使用说明
- 所有模型资源均由用户上传分享，内容来源于网络公开资源
- 侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
- 模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们
关于费用
我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！
扫码手机访问
抖音私信 @jobsfan
Summary
The Honeycomb provided with Elegoo Phecda engraver is not connected to the frame.
I made this set of foots in order to elevate the printer (without needing the extended foots) but most of all to allow a coorect positioning of the ruler.
I adjusted it so that (with my end of course switches) it matches to the zero of the engraver.
On the picture the back plate is missing but the parts are made to include them. Bonus, the plate don't touch the bottom so that if it's exposed to laser and it heats there is no risk for the table.
Print Settings
- Rafts:Doesn't Matter
- Supports:Yes
- Resolution:0.2mm
- Infill:20%
- Filament brand:
Grossiste 3D
- Filament material:
PLA
- Notes:
Printed with Ankermale M5, easymode settings with only supports activated.
How I Designed This
Designed with freecad and a caliper
Tags
相关内容
猜你喜欢
联系我们
热门推荐
-
Cessna 172三维模型2023-03-26 -
披萨面积估算模型2023-06-20 -
暴风troop头盔3D模型2023-06-25 -
工作坊组织结构分隔条2023-08-08 -
参数化Whynter AC排气管道接头3D模型2024-01-04
最热下载
-
ODCON1 3D打印枪壳（Gun4IR项目，NAMCO GunCon45风格）2023-03-26 -
Gun4IR 光枪侧边按键改装模块｜3D打印机械开关支架2023-05-23 -
索尼NP-FW50电池专用外壳（5个装）2024-04-24 -
适用于ebyte E104-BT5040U USB适配器的外壳2024-04-28 -
HGX lite v2支架2025-07-18
最新模型
-
FPV遥控纸飞机（机身）STL 3D模型2025-09-16 -
高跟鞋鞋架2025-07-17 -
艺术雕像（女性）2025-07-16 -
巴黎卢浮宫的三圣母像2025-07-16 -
碧奇公主；桃子公主；水蜜桃公主2025-07-16