莫若洞穴小号嘴塞

Mojo Cave Contra Bass Clarinet Mouthpiece

2024-04-11 09:43:19

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发货），感谢理解带宽压力

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

Designed for and Tested on my BBb Leblanc Paperclip CBC. Will fitt other BBb and EEb Leblancs and most other brand BBb Contras. Somewhat dark but not dull. Unique comfort beak design.

Uses (3) O-Rings 30mm ID x 2mm wide. Use a little petroleum jelly in neck socket. If the fit is not good, you may need to scale the stl file up/down a little (in the slicer) or try different size O-Rings or file the grooves.

I prefer using a Rovner ligature or my own cord ligature design.

Print Settings

Printer:
JG Artist-D
Rafts:
No
Supports:
Yes
Resolution:
.2 mm
Infill:
25%
Filament brand:
TecBears
Filament color:
Black
Filament material:
PLA
Notes:
Printed blank should be 112 mm long and 40 mm wide at the shoulder. I adjust the XYZ steps in my printer as needed to get the right size.

Use 4 wall layers or make solid. I block supports on the logos and use a brim.

Silky PLA works nice too.

Post-Printing

Must be hand finished!

Like any 3D printed mouthpiece, it will only play as good as your facing skills are. I like these finished to a .091" tip opening = 2.31 mm. The facing length at 61.5 = 30.75 mm. and an elliptical facing curve shape with an aspect ratio of 8.