Airsoft Cz-61 HPA引擎和FCU 3D模型

Airsoft Cz-61 HPA engine and FCU (abandoned)

2024-04-11 10:24:00

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

A project I have been working on for awhile, and given up on. The HPA engine is fully functional, but I cannot successfully integrate the components into the body. If anyone wants to try this project please do, but it is not a simple project.

Print Settings

Printer brand:
Sovol 3D
Printer:
Sovol SV03
Rafts:
Doesn't Matter
Supports:
Yes
Resolution:
0.3 - 0.1mm
Infill:
%100
Filament brand:
any
Filament color:
any
Filament material:
PLA, PETG
Notes:
Non printed parts list.
1 x AEP cylinder (from gearbox)
1 x cut down AEP spring(from gearbox)
1 x 1/8 NPT solenoid (I got mine from here https://www.amazon.com/dp/B07N2DZ5FP)
1.5 1/8 NPT steel or brass nipple
3 x 3/4 OD 5/8 ID o rings
1 x 39/64 OD 3/8 ID o ring
1/2 in 3/16 steel rod
1.8 in 1/4 OD 3/16 ID aluminum tube
2 x #6 2.5 in bolts
Assorted thin washers for shimming
1 Arduino nano (or knockoff)
3 x 1Kh resistor
1 x N type mosfet transistor, capable of running 11.1V and 540Mah

Modifications to airsoft body:
You will need to remove the gearbox and all mechanical parts in the lower receiver, remove a support strut at the back of the lower receiver, drill a hole in the back to fit your HPA line in, remove one of the screw mounts that holds the handle and some material from the handle itself.