巴特勒与梅克勒斯墙面装饰

Bat'leth and/or Mek'leth Wall Display

2024-04-11 12:05:03

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

After making my own Bat'leth and a pair of Mek'leths, I needed a way to artistically display them for all to see. The widest part is the circular base which is 300mm across. Feel free to scale the entire thing accordingly.

It should hold any full-size Bat'leth and Mek'leth. I designed it to hold a Bat'leth sized according to the original concept drawing. The pins will fit into the outer handles if they are 12" or less apart and they will fit within the middle handle if it's more than 14" wide. Keep those values in mind if you have to scale the entire mount to fit on your printer.

There are two holes on the back for mounting. The intent is to place two screws into a stud in the wall. The display should hang from the top screw while the bottom screw keeps it vertical.

If you want to display just a Bat'leth or just a pair of Mek'leths, select the appropriate wings and spire top.