Cubism Bowl 立体主义碗

Cubism Bowl

2024-04-11 14:43:06

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

When I was printing the Cubism Vase (https://www.thingiverse.com/thing:6572841) I noticed the inside 3D pattern was very attractive so I decided to make a bowl version also that shows off this pattern.

STL file is designed to be sliced using vase mode (spiralize outer contour).

Size approx 84 x 84 x 38mm - print time approx 40 mins in vase mode and only 5g of filament (0.4mm wall thickness, 0.2mm layer height on Ender 3).

Scale it to whatever size you want.

Tip: When printing in vase mode if you want larger wall thickness than 0.4mm (while keeping all speed advantage of vase mode) you may be able to use a pseudo 0.6mm nozzle just by selecting 0.6mm nozzle in the slicer but not changing the actual physical nozzle. For me this works great - I have even pushed it to pseudo 0.8mm but I have a high flow type 0.4mm nozzle. Increasing the extruder temp by say 10C can help reduce viscosity, especially when using silk filament. Using this trick you can get 50-100% more wall thickness in the same print time.

see also my reflective tiles vase https://www.thingiverse.com/thing:6571255