Creality精灵 - BTT ADXL345 3D模型

Creality Sprite - BTT ADXL345

2024-04-11 17:22:08

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发货），感谢理解带宽压力

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

This a slight remix from Goofball222's version. Hole pitches are different 15.50mm not 15.00mm also included a recess underneath for a pair of M3 nuts to fasten the PCB down with a pair of M3 Screws.

I modified the Ovals to Ob-holes on the sides to add strength when fastening it to the Sprite extruder.

Thanks to Goofball222 for doing the majority of the work, a couple of tweaks made it usable for a different ADXL345 PCB.

Print Settings

Printer brand:
Longer
Printer:
Longer LK1
Rafts:
No
Supports:
Yes
Resolution:
0.2
Infill:
15
Filament brand:
Geeetech PLA Silk
Filament color:
Silver
Filament material:
PLA
Notes:
Supports touching build plate.

Print with the tab down as shown in the photo of it mounted to the bed.

M3x0.5 x8 x2
M3x0.5 Nut x2

M3x0.5 x6 x2 to bolt to extruder.

It has been remarked that if you have your fans set to come on whilst running the tests this can generate false noise and will impact on the results. There is the recommendation to d/c the fans temporarily during the test.