Phoenix 10" FPV Drone (iFlight Helion Mod)

2024-04-11 17:22:08

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Phoenix 10" FPV Drone (iFlight Helion Mod)

Summary

This is a mod I made for the iFlight Helion. It is not a full 10" drone project. It includes all the necessary files to convert the Helion into the Phoenix. Files are named with a prefix that stands for the material you should use to create them.

Some notes:

GPS holder is designed to fit the Foxeer M10-250.
Rear tail is designed to fit a TrueRC Bardpole in the middle and two SMA connectors on the sides.
Original ESC must be rotate 180° and the XT90 resoldered to stay in the front, passing through the bottom plate.
You need to change most of the original screws, be prepared.
GoPro mount does not fit the original USB BEC, but fits a generic USB plug tha you can find on Amazon. You must power it with a dedicated BEC that provides 5V outpout. The mount also include a holder for the buzzer and allows the passage of wires to connect the buzzer to the FC.
DJI Air Unit will now be sitting in the back. You must get a 30cm camera cable to reposition it. 25cm may be enough, 20cm will not make it.
LED holders are designed specifically for MenaceRC COB LEDs. You will have space in the front to accomodate the LED driver.
Radio link receiver can be positioned on top of the O3 air unit, to keep antenna wires as short as possibile to the back antenna, that is considered the main one.

I won't be responsible, under any circumstamces, of any damage to your drones doing this mod. I've shared it upon several requests from the people, and that's it. You will be responsible for it.

Please notice that the original Helion design is property of iFlight and 2RAW. I am just sharing this mod and in no way I am trying to infringe any copyright that may be present on the original design. Also let me make clear that I am not taking any advantage from it, as this is just a mod I made for myself without any intention to sell it or to get any profit from it. Again, I am just sharing it upon request from several people.

Since I am just an enthusiast sharing his mod, I cannot support this in any way. I am not going to print or create parts for you. You also need to figure out by yourselves how to put it together in the right way. It should be self-comprehensive if you're familiar with building drones.

Have fun!