嵌套式花盆带排水

Nested Plant Pot With Drainage

2024-04-12 01:34:52

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

This is a plant pot with drainage underneath that can hold two smaller pots. You can print the inner pot included in the stls or use a 3.5inch nursery pot like the one in the picture.

This design was inspired by 0ToCheekiBreeki's design. I've redesigned it so it's smaller and will fit on printer beds while including most of the features.

Should be pretty easy to design some grow light holders onto this if you want to try.

Print Settings

Printer brand:
Sovol
Printer:
SV07
Rafts:
No
Supports:
No
Resolution:
2mm
Infill:
10%
Filament brand:
Elegoo
Filament color:
White
Filament material:
PLA+
Notes:
This print takes up the whole bed. For easier printing you can scale it a few mm smaller to better fit onto the bed.
Having a level bed is essential for this print because it takes up so much of the bed. If your bed isn't very level the first layer will print poorly and ruin the rest of the print.

I had minor warping on the corners of the large pot probably because of difference in bed temperature and cooling at the edges of the bed.

Bridging - There is a 100mm bridge where the water drains out. This wasn't a problem for my printer but may be for yours.

Perimeters - I printed with 2 perimeters and 10% infill. This takes longer but uses less filament. For a shorter print without visible infill when light shines through you can use 3 perimeters.