WPL C24-1 周长滚杆

WPL C24-1 Perimeter Rollbar

2024-04-12 11:47:34

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发货），感谢理解带宽压力

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

This design is inspired by Theoduf_'s rollbar design. That was a great simple rollbar design that I love to print. However, the rollbar is hindering access to the battery lid.

What inspired me to design this rollbar is so that the battery lid can be opened and closed without needing to remove the rollbar.

This perimeter rollbar is to be attached to WPL C24-1's 4 holes on the bed.

I included 2 STL files : the one with pin holes, and another one with pegs. For the one with pin holes, you need :

-2 pcs of d 3mm x L10 mm dowel pin for the front holes.
-2 pcs of d 2mm x L 10 mm dowel pin for the rear holes.

I personally liked the one with dowel pins, because it will need less support. Also it is stronger. But if you don't have quick access to dowel pins, the one with pegs can also work. Careful with the delicate pegs.

Print Settings

Printer brand:
Creality
Printer:
Ender 5
Rafts:
Doesn't Matter
Supports:
Yes
Resolution:
0.4
Infill:
100
Filament brand:
eSUN
Filament color:
Black
Filament material:
PLA+
Notes:
I printed using 0.8 mm nozzle and 0.4 mm layer height (for quicker print). Also I printed the one with pin holes, so I do not need to print a detailed small pegs

I only need the quicker print in using 0.8 mm nozzle. A default 0.4 mm nozzle should not be any problem. Also I suggest if you want to print the one with pegs, print it with smaller nozzle.