3dsjs

宜家 PAX 补充 架子 支撑 间隔物

IKEA PAX KOMPLEMENT shelf support spacer

2024-04-12 15:08:52

使用说明

  1. 所有模型资源均由用户上传分享,内容来源于网络公开资源
  2. 侵权投诉:通过抖音私信 @jobsfan 联系我们(需附版权证明),24小时内处理
  3. 模型将通过邮件发送(5分钟内自动发货),感谢理解带宽压力
关于费用

我们是爱好者共建社区,为维持服务器成本,每个模型收取微量费用(仅覆盖基础开支)。我们承诺最低成本运营,感谢您的支持!

扫码手机访问
抖音私信 @jobsfan

Summary

This spacer is intended to be put into an IKEA PAX wardrobe, between a KOMPLEMENT shelf and a KOMPLEMENT clothes rail.

Because 75 cm and 100 cm wide shelfs can flex under heavier stuff, with this spacer and a clothes rail - assembled directly under the shelf - can provide enough support to avoid bending and potential breaking of the shelf.

For lighter loads you can use one spacer in the center. For heavier loads, you can put two or more, spread evenly.

The design was made in FreeCAD 0.21. I've attached the project file, feel free to use and modify it.

Print Settings

  • Printer brand:

    FlashForge

  • Printer:

    Adventurer 3

  • Rafts:
    Doesn't Matter
  • Supports:
    No
  • Infill:
    15%
  • Filament brand:

    Spectrum

  • Filament material:

    PLA

Tags

宜家 PAX 补充 架子 支撑 间隔物
朋友,你觉得上面这个模型,属于下面的哪个分类?
必须全中文,且长度不超过15

相关内容

猜你喜欢

联系我们

邮箱: 289047960@qq.com