色彩积木：孩子们的玩具终于来了！

COLOURBLOCKS Finally, toys for the kids!

2024-04-13 04:48:41

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

Finally done with the Colourblocks! After making the Numberblocks toys a friend asked me to do these next. Turns out they were a little more complicated, but I'm finally done!

Printed in most any layer size, I did what I could to make these super easy to print. Look through the pictures for how I printed the arms standing up, with supports. Everything else will print without supports, the arms and hands probably would too, but at that height it may get knocked over. Print them in any colorful materials. I used PLA. Make sure to put the bodies back down on the print bed, the arms go hands up, the legs will stand as they end up.

If you have questions please ask!

Green and Yellow I used pieces of filament for the arms and legs, hot glued into place, heated up gently to get them to balance standing up. You could also use any kind of solid rod, drill the holes out a little more to make them work. Use the files Yellow_green_hands and foot.

I gave a variety of arms. Use the mirror function of your slicer to make them right and left hands. If you want to bend them in other ways, you can use a heat gun to soften them up, just be careful. Those are files ARM_1, 2, and 3.

You might be able to assemble them in your slicer and print them as one piece, lying down with supports. That's up to you.

If you liked these please like and share, and if you want to see the numberblocks or a great rainbow night light I made because I have all this colorful filament now, check my other designs!

https://www.thingiverse.com/thing:6573960

https://www.thingiverse.com/thing:6542501

https://www.thingiverse.com/thing:6542487

and more!