Golf III前轮螺母盖壳

Golf III front wheel nut cover cup

2024-04-13 17:00:11

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

This print is a front wheel nut cup or protective dust & rust cover for a Volkswagen Golf III. Most likely fits other VW and Skoda cars too.
I recommend only using ABS and not PLA since front brakes heat up.
On my 1 hour test drive at hight speed these cups did not come loose from my Golf III. Did not use any glue. Using some glue makes it more solid.
Notice: this is not an original part, so use at your own risk and assesment only.
Notice: originally there is no dust cover for Golf 3 front wheel axel nut. However it might be useful to minize heavy rust and dust. And maybe give a bit positive outlook to car, compared to the rough wheel nut without cover.

Print Settings

Printer brand:
FlashForge
Printer:
Creator Pro
Rafts:
No
Supports:
Doesn't Matter
Resolution:
0.20
Infill:
25 %
Filament brand:
any
Filament color:
any
Filament material:
ABS
Notes:
Do not use PLA since brakes come hot when braking. Notice: this is not an original part, so use at your own risk and assesment only.