超薄款咖啡机胶囊容器 - 4个容量
ultraslim nespresso capsule holder - 4 capsules
使用说明
- 所有模型资源均由用户上传分享，内容来源于网络公开资源
- 侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
- 模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们
关于费用
我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！
扫码手机访问
抖音私信 @jobsfan
Summary
designed to put on my nespresso essenza mini lateral wall, taking as little space as possible. total height is 6mm. the back wall is 1.5mm high. you may "sink" the model 1mm into the hotbed, if you want it even thinner (that's what I did, actually)
it holds 4 capsules. it's easy to put in place with some double side adhesive tape.
you may print several and put them side by side.
mine is PETG, but PLA, ABS and even TPU should work fine
you may print without supports, even with the hanging parts
please, share it if you print it!
hope it helps someone :)
Tags
License
ultraslim nespresso capsule holder - 4 capsules
by heraldomedeiros is licensed under the Creative Commons - Attribution license.
相关内容
联系我们
热门推荐
-
叫我可爱吧（带刀的鸭子卡通）2023-03-26 -
带摄像头和电池箱的Raspberry Pi箱2023-05-02 -
BMW F650GS 燃油泵专用扳手2023-05-11 -
花园浇水 3V设计2023-05-14 -
100mm至58mm吸尘管接头2023-08-04
最热下载
-
通用型1/10比例底盘 - DKS基础款2023-03-26 -
可定制像素珠子照片面板2023-03-26 -
E3D火山喷嘴2023-05-26 -
Metabo SXE450 真空连接器（适用于Bosch Advanced VAC20）2024-01-11 -
GTA 5 大地图模型2024-04-21
最新模型
-
网眼透风拖凉鞋赤足鞋凉鞋2025-07-18 -
戴森V6真空吸尘器配件壁挂支架2025-07-17 -
系带3D凉鞋（儿童款）2025-07-16 -
私密羞羞娱乐骰子2025-07-15
