植物花瓶插入装置

Plant Pot Insert

2024-04-14 02:00:18

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

This is an insert for plant pots that has a hole at the bottom for drainage. Insert this thing in a beautiful plat pot that has no drainage hole. You basically plant your flower/plant/succulent directly in here and then place the thing in your pot. This thing is not visible once it's inside your pot.

I've also included a bottom support to keep the plant and earth away from the pot so that the drainage will actually work.

IMPORTANT: There are two models of the insert, one a typical 3D model while the other one is for use in "vase mode" or "spiral vase mode". Vase mode prints much faster and yields a sturdy enough part for use as an insert.

ALSO IMPORTANT: You need to pay attention to two (2) little things:

Drill a hole at the bottom of the insert (or punch it with a blunt instrument!) for drainage
Install the bottom support the right way, with the drainage cutouts at the bottom (as shown in photos). Not a huge deal if you place the support upside down, but the idea is to let any drainage water flow to the entire bottom surface of the pot. The little arms/stars are there to center the part in the port.

Print Settings

Printer brand:
Prusa
Printer:
I3 MK3S
Rafts:
No
Supports:
No
Resolution:
0.3 mm
Infill:
10% for bottom support
Filament brand:
Sunlu
Filament color:
White
Filament material:
PLA
Notes:
Print in the same orientation as shown in the images. No supports needed, but I used a brim for the bottom support just in case (very easy to remove). Keep in mind that none of these parts will be visible once in your pot, such finish quality is not important.