Carp Swinger Bite Indicator, Modular, Fishing

2024-04-14 02:14:44

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发货），感谢理解带宽压力

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Carp Swinger Bite Indicator, Modular, Fishing

Summary

I needed a simple yet modular swinger. As i couldn't find one fitin my need...

so here is my take on the subject:

The swinger holds the fishingline with two small neodym magnets (you can order 100 of them for really cheap). The system ist very modular. You can use a printed screw, nut an use some metal washer as weight. If you like it heavy, use a metal m6 screw, a metal m6 nut (or two), or washer, or a longer screw... what ever fits you. With the thumb-screw, you can change the weight in seconds directly at the water.
The magnets can hold pretty much weight, but also release the line easily. As long as the magnets do not have scratches, the fishingline ill not take any damage.

what you need:

some clue
two neodym magnets: radius 3mm, height 2mm
some line/string

Print Settings

Printer brand:
Creality
Printer:
Ender 5
Rafts:
Doesn't Matter
Supports:
No
Resolution:
Dows not really matter
Infill:
75% - 100%
Filament brand:
-
Filament color:
-
Filament material:
PLA
Notes:
i had the best prints for the tiny cap, when it was lying sideways.

I only had PLA. If you print it in black and use it on a hot sommerday i am not shure if it will take damage.

Post-Printing

1) Remove stringing inside the head. I used some filamentparts.
2) Insert the two magnets (see images)
3) move the magnets around a bit. I used a 4-times folded paper between the magnets and pushed the outer magnet back with a filament part. So that you are shure, the magnets hav a bit space to mve around
4) Clue the little cap in place, to fix the magnets inside