轨道钉

Track Pins

2024-04-14 05:19:47

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

Track Pins for use with the Harbor Freight mats when using the mats to build/make a Mini-Z track.

I printed the track pins using a FlashForge Guider II printer which has a large print bed. There are 3 files of my track pins that you can download for use. I broke them into groups since not everyone has a printer with the bed size of the Guider II.

The track pins will require you to make 10mm holes in the mat pieces and any material that you are using to make the guard rails/barriers with up to a total thickness of about 2 inches.

When I built my Mini-Z track with the Harbor Freight mats, I used the edge pieces that came with the mats. I double stacked them and drilled out 10mm holes for the track pins to fit into. I designed my own tool using a Traxxas TRX4 aluminum shock body. You should be able to use a 10mm hole punch or similar tool to make the holes.

Each piece of the track pin measures 37mm (1.45 inches). they can extend from 1.45 inches to 2 inches.

Print Settings

Printer brand:
FlashForge
Printer:
Guider II
Rafts:
No
Supports:
No
Infill:
10%
Filament brand:
FlashForge PLA-PRO
Filament color:
Red, Yellow
Filament material:
PLA-Pro
Notes:
Temp: 225
Bed Temp: 60
Nozzle Size: 0.4mm
Shells: 2
Top/Bottom Solid Layers: 3
Infill: 10%
Infill Pattern: Hexagon