鲨鱼 IF200 真空吸尘器配件壁挂架

Shark IF200 Vacuum Accessory Tool Wall Mount

2024-04-14 07:00:24

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

I'm terrible at 3d drafting, but I'm great at using the cut tool in Bambu studio.

I was looking for a wall mount for my Shark vacuum accessories and couldn't find anything. What I did end up finding was a a wall mount for a Ryobi, and a Shark accessory attachment for the vacuum itself. After a bit of cutting, scaling, and assembling in Bambu ... lo and behold!

When I was doing the cutting and assembling in Bambu , it looked like the original Ryobi actually would have worked with the Shark accessories, but I needed one that held 4 attachments so proceeded to make this.I also needed to adjust the Y so that the longer fabric attachment could fit in.

I printed 5% gyroid. A bit flimsy overall, but as long as you don't press too hard it should hold. If this one breaks I'll probably try additional infill or making the bottom piece a little thicker.

I used bambu studio to make this, and used cylinder negative part modifiers for the screw holes, unfortunately bambu doesn't save negative parts when you export stl. just gotta add those into the model (or just drill through), and youre golden.

鲨鱼 IF200 真空吸尘器配件壁挂架

朋友，你觉得上面这个模型，属于下面的哪个分类？