30毫米双屏支撑架 - 麦克风臂

30mm Dual Monitor Stand - Mic Arm

2024-04-14 07:00:25

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发货），感谢理解带宽压力

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

I needed a more extended version of the original for my dual monitor setup. I also found that the 30 mm half-round on the arm and bracket needed more substance as they broke regardless of print orientation in my setup.

I did three sizes: SM, MD, and LG. The Medium worked for my setup, but while I was at it, I decided to add a large version just in case.

Adjustments: I added more material for the bracket and arm to hold onto my dual monitor stand without breaking. I also added a wedge under the Mic holder end for support because my printer printed best with the piece standing up, and it had an unsupported overhang, which allowed me to go without supports.

My print settings:

Printer: FLSUN SR
Slicer: Cura
Material: PETG
Infill: 15% gyroid infill
First Layer fan: OFF
First Layer Height: 0.3mm
Fan after first Layer: 50% (Allows a balance of the PETG to melt to the layer and cool some)
Layer Height after First Layer: 0.2mm
Bed Adhesion: 10mm brim
90C Bed Temp
240C Nozzle Temp

My First remix - I'm happy to hear some feedback!

30毫米双屏支撑架 - 麦克风臂

朋友，你觉得上面这个模型，属于下面的哪个分类？