泽绵绮

沢すみれ

2024-04-14 09:48:50

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发货），感谢理解带宽压力

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

PROPERTY OF SEGA. USED WITHOUT PERMISSION.

printed in 1:8 x 300% (or 1:4 x 150% if you're creative). i've been putting off finishing this model since last fall, simply because of the hair, but i picked it up recently and suffered through it. its not great, it printed properly on the first print with the expected 'webbing' happening in the back between her hair and coveralls. there was a split above her breasts that's already been resolved in the latest BLEND and STL.

the model was optimized further after printing. i noticed some large faces in the coveralls i forgot to subdivide as well as a huge cap on the chest which i fanned out and subdivided as well for cleaner booleans. hard hat parts were also thickened and optimized and the band was anchored so it wouldn't float around. some hair ends were also scaled proportionally to their tips.

ENJOY!

don't forget to hollow your STL in PrusaSlicer.

one more note, the model is 3xSS but the coveralls are set to 4xSS because they are much lower poly than the rest of her. i hope this write-up wasn't in vain since i might be exceeding thingiverse's upload limit.