Mecpow X3 激光切割机脚架
Mecpow X3 Laser cutter foot holder
2024-04-15 03:32:13
使用说明
- 所有模型资源均由用户上传分享，内容来源于网络公开资源
- 侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
- 模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们
关于费用
我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！
扫码手机访问
抖音私信 @jobsfan
Summary
Leg holders to keep the mecpow laser cutter in the same spot if you need to take it in and out of an enclosure. First place these on the feet of the laser cutter and place it on the surface that you want to attach it to. Next mark out where the screw holes should go with a pencil and remove cutter so you can drill through them. Screw these in with the smallest screws you have and voila a repeatable location to place the laser cutter without taking up too much of your build area.
Print Settings
- Printer brand:
Creality
- Printer:
Ender 3 Pro
- Rafts:No
- Supports:No
- Resolution:0.4
- Infill:50%
- Filament brand:
Jayo
- Filament color:
whatever you want
- Filament material:
PLA
- Notes:
The first layer is going to look ugly given the sizing of your nozzle and tune of your 3d printer.
Tags
朋友，你觉得上面这个模型，属于下面的哪个分类？
必须全中文，且长度不超过15
相关内容
联系我们
邮箱: 289047960@qq.com
热门推荐
-
Hollow Clock 2: 静谧与流畅2023-03-26 -
抽奖骰子2024-02-05 -
力量感十足的宙斯3D模型2024-04-29 -
滚动支架2024-05-04 -
旋转顶部2024-05-05
最热下载
-
伊瑟宁加德骰子塔（奥斯坦克）2025-07-16 -
7英寸HDMI显示器-B外壳2024-04-01 -
Dyson V6系列3D模型适配器站2024-04-15 -
Myuto Flick 19X - 可工作的玩具枪（橡皮筋弹弓状枪）2025-08-17
最新模型
-
比基尼模型2025-07-16 -
偏移适配器 for BTT SKR 3 EZ on Ender 5 Plus2024-05-08 -
适用于1个麦克风或2个麦克风的大疆保护套2024-05-08 -
简单植物 combat 机器人2024-05-06 -
狐狸粉尘密封压机，直径36毫米2024-05-06