innovv k6型号摩托车前挡板/护板支架3D模型

innovv k6 motorcycle fender/fairing mount

2024-04-15 07:03:46

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

I made this to mount my innovv k6 to my fairing so it doesnt stick out and isn't visible

Sandpaper the bottom and use VHB tape

The holes at the top is to bolt down the mount so it is snug. Use the supplied rubber strips on the camera and slide it in, then bolt it down until snug.

Fusion360 model included if you want to modify it

Print Settings

Printer brand:
Bambu Lab
Printer:
A1
Rafts:
No
Supports:
Yes
Infill:
70
Filament brand:
Bambu Lab
Filament color:
Black
Filament material:
ASA
Notes:
Printed with 70% gyroid infill

Bambu Lab ASA black in an A1S

You must print this with glue and cool it down very slowly or it will warp instantly. The bottom surface MUST remain flat