马克四号护臂器

Arm protector for Mark4

2024-04-15 21:31:41

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发货），感谢理解带宽压力

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

Inspired by GepRC Mark 4 - Arm Guard and GEPRC Mark4 Arms Protector, but has no holes for bolts. The idea is that the arm protector is printed with TPU plastic and is glued to the arm.

The protector arm fits OK 5″ Mark4 frame arm, but with 7″ frame is was a bit tight.

Print Settings

Printer brand:
Creality
Printer:
Ender 3 Pro
Rafts:
No
Supports:
No
Resolution:
0.4mm
Infill:
20%
Filament brand:
-
Filament color:
-
Filament material:
TPU
Notes:
I suggest to add more layers to the bottom. With 0.2mm layer height it could be 10 layers so that bottom is 2mm.

The arm protector could be printed without supports if it is placed on the narrow pad.

License

CC BY-NC-SA

Arm protector for Mark4
by dma_k is licensed under the Creative Commons - Attribution - Non-Commercial - Share Alike license.

马克四号护臂器

朋友，你觉得上面这个模型，属于下面的哪个分类？

上面没有我要的选项

必须全中文，且长度不超过15

相关内容

猜你喜欢

联系我们

邮箱: 289047960@qq.com

最新模型

最热下载