电子镊子固定架（适用于工具墙，可容纳两个镊子）

Electronics tweezer holder for toolwall (2 tweezers)

2024-04-15 22:01:25

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

I don't have a whole set of electronics tweezers, just some ceramic tip and reverse action ones, so I was looking for a toolwall holder to accomodate only two pairs rather than the standard set of seven or eight. The one by As_Motion_Lab (https://www.thingiverse.com/thing:3660371) looked good so I cut it down, but it turned out my reverse action tweezers didn't fit on it and I ended up designing my own based on it.

So I hope it's okay if I mark this as "heavily inspired by" https://www.thingiverse.com/thing:3660371 rather than a remix since I did basically design the whole thing from scratch to fit my tweezers...