Longer LK5 Satsana风扇配件

Longer LK5 Satsana Fan Duct

2024-04-16 07:38:50

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

This is a Satsana style fan duct that is originally for an Ender printer. I created new mounting points and it uses the factory Longer LK5 hotend mounting point to fit on the printer. The hotend slides into the holder and then the factory screws keep the entire assembly mounted (see blue test prints). I've been using this for quite some time and have had no issues with my prints. Uses the stock hotend fan and part cooling fans. I've included the duct and the wire hiding clip for that clean look. I've included a cutout that you can use to hide your left fan wiring or simply leave it as-is if you don't feel like cutting and splicing your fan wire. Either way, it works the same. Print as seen in the photo with supports.