赛道排水塞转换器

SeaDoo Drain Plug Turner

2024-04-16 08:21:33

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发货），感谢理解带宽压力

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

I recently bought a used SeaDoo jetski and the previous owner let me know one of the bilge drain plugs was stuck and he hadn't been able to remove it. The plug has a fairly small surface to grab onto and it's plastic so a metal tool would probably break it rather than turn it.

So I figured I'd create a 3D printable tool for the job and share it with other fellow jetskiers that might have a similar problem. My ski is a 2022 SeaDoo and I assume the basic design for these plugs that let you drain the bilge after a ride hasn't changed a lot but look at the pic of the plug I've included so you know it's the same one. The plug I have is a bit larger than 1" across and has a curved handle shaped a bit like a tilde (~). I've shaped the opening in the tool to conform to the basic curved shape to give it more support and contact surface area. For me the plug slides easily into the slot and has very little wiggle room.

I don't guarantee it will work for all stuck plugs but it's worth a try (post a comment if you find this useful!). Fortunately the entire drain plug assembly is easily bought online if you break off the handle. I DON'T recommend using this tool to tighten your drain plugs. They should be fine hand tight. Also, this is ONLY designed to unscrew the bilge drain plugs, not any other part of the ski. Please only use it for what it was intended for. I won't be paying for your broken jetski. ;-)

This may work for other jetski models and manufacturers if they have similar drain plug handles. I haven't really looked at other skis to see how common this design is. Please refer to the model images to see what kind of handle this can turn.

Print Settings

Printer brand:
Anycubic
Printer:
Kobra Max
Rafts:
No
Supports:
No
Resolution:
0.3mm
Infill:
20%
Filament brand:
Anycubic
Filament color:
Black
Filament material:
PLA
Notes:
I probably overdesigned this for strength but when you're talk about manual tools, sturdiness is a good thing. 20% infill should be fine but turn it up/down as you see fit. I printed mine pretty coarse (0.30mm layers) and it came out great. There aren't any fine details that would benefit from a finer setting and you can probably go up a bit more to cut print time.

I printed mine with the slot for the drain plug facing down and it came out perfect without any supports. I did use a brim for adhesion but this model has a lot of surface contact with the build plate so probably not really needed.