JOBO CPE循环泵
JOBO CPE Circulation Pump
2024-04-16 08:35:53
使用说明
- 所有模型资源均由用户上传分享，内容来源于网络公开资源
- 侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
- 模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们
关于费用
我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！
扫码手机访问
抖音私信 @jobsfan
Summary
Desiring a small circulation pump for my venerable JOBO CPE film processor I had placed a small pond pump in the right front corner.
This worked well, so I decided to make a more permanent, yet removable, solution.
PETG will stand up to the heat of the water bath and is easily cemented together.
Print Settings
- Printer brand:
Wanhao
- Printer:
Duplicator 6
- Rafts:No
- Supports:No
- Infill:20%
- Filament brand:
Polymaker
- Filament color:
Grey
- Filament material:
PETG
- Notes:
Handle is printed separately and then solvent welded/glued into place. Small fish tank, Pond Pump or the like is used. Cord is hot glued into the slot.
Post-Printing
Handle is glued into place
How I Designed This
Fusion 360 and Simplify 3D
Tags
朋友，你觉得上面这个模型，属于下面的哪个分类？
必须全中文，且长度不超过15
联系我们
邮箱: 289047960@qq.com
热门推荐
-
2023款智能立体打印机箱2023-03-26 -
韦洛西卡·梅迪 模板七号2023-08-23 -
Philips 马拉松 FC9225 轮子 飞利浦 Marathon FC9225 轮子2024-03-31 -
丰田RAV4车门座椅夹板螺栓更换2024-04-20 -
克利普施 Promedia 2.1音量Pod模拟机器架（铝制支架）安装基座2024-04-29
最热下载
-
弓箭和投射器战车前轮2023-04-12 -
BF1 单枪手机 08/18型号 Lego2024-03-23 -
21700毫安电池单元保持架2024-04-06 -
NA Miata车灯遮光条折叠机构顶盖2024-04-15
最新模型
-
Rancilio Silvia 58mm Portafilter Hook2024-05-08 -
长方形型立体储物架2024-05-08 -
Nest摄像头电源支架2024-05-06 -
奥比斯福特仪表盘修复插件2024-05-06 -
极简家具把手2024-05-06