Hulkey Robinson (F) 到 Boston 摩擦配合适配器

Hulkey Robinson (F) to Boston friction fit adapter

2024-04-16 14:20:35

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发货），感谢理解带宽压力

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Hulkey Robinson (F) 到 Boston 摩擦配合适配器

Summary

This is a remix of Adapter B but the same problems and solutions apply to all three. Issues this remix addresses are:

Lugs for the Hulkey Robinson bayonet fitting are not attached to the wall, just sitting adjacent. They snap off when touched. Revised design is fully attached and a solid bar straight across for strength.
Location of the lugs (bar) is too close to the end of the adapter. I moved it so top edge of the bar is now ~13mm from the end. This provides good sealing of the O-ring on my pump.
Internal taper from bottom to top parts was horizontal shelf, requiring support. I made this 45 degree so no support is required.
Ring for tying string on was half way up, requiring support. I moved it to the base so no support required.
Text required support. I reduced height of text so no support required.
External taper was notched at change of diameter. I reinforced / smoothed this area.
All changes were done on Tinkered so it's pretty rough but it works well now. If anyone wants to do this better I can provide Tinkercad links.

Print Settings

Printer brand:
Bambulabs
Printer:
Bambu X1C
Rafts:
No
Supports:
Yes
Resolution:
0.2
Infill:
15%
Filament brand:
X3D
Filament color:
Red
Filament material:
PLA
Notes:
Prints easily and with two wall loops seems strong enough for all practical purposes. Support is very small, just under the bar for bayonet locking.

Hulkey Robinson (F) 到 Boston 摩擦配合适配器

朋友，你觉得上面这个模型，属于下面的哪个分类？

上面没有我要的选项

必须全中文，且长度不超过15

猜你喜欢

联系我们

邮箱: 289047960@qq.com

最新模型

最热下载