Raspberry Pi触摸屏显示器T-slot支架
Raspberry Pi Touch Display T-Slot mount
使用说明
- 所有模型资源均由用户上传分享，内容来源于网络公开资源
- 侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
- 模型将通过邮件发送（5分钟内自动发货），感谢理解带宽压力
关于费用
我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！
扫码手机访问
抖音私信 @jobsfan
Summary
This project starts to upgrade my Ender 3 with Ocroprint and Octodash.
I followed this link and bought the Raspberry Pi Touch Display
The assembled parts are designed to be mounted on a 20x20 aluminium frame without any screws.
The back part of the display, the cover and the display are held together using 4xM3x35 screws. The honeycomb hood and the cover are joined together using 4xM3 inserts + 4xM3 screws (length doesn't matters).
Once mounted just remove the 2 screws in the upper right corner, slide the display into the t-slot, insert back the screws and set the display as desired. I set it in the corner above the screws as you can see in the photo.
Print Settings
- Printer brand:
Creality
- Printer:
Ender 3 Pro
- Supports:Yes
- Resolution:0.2
- Infill:20%
- Notes:
I used standard quality (0.2mm) and 20% infill for all the pieces.
Where needed I used Tree support.
I suggest to use Brim to avoid warping effects.
Tags
License
Raspberry Pi Touch Display T-Slot mount
by clothes is licensed under the Creative Commons - Attribution license.
相关内容
联系我们
最新模型
-
骰子模型2024-05-08 -
优尼斯特牌小型墙支架2024-05-08 -
史蒂夫·弗瑞机器人飞行器脚部与腿部组件更新版——来自《静默的运行》2024-05-06 -
罗技千军耳机挂钩2024-05-06 -
Scirocco MK2 后排座椅夹2024-05-06
最热下载
-
1:144 比例星际飞船模型2023-03-26 -
参数化的两部分模具生成器（用于OpenSCAD）2023-03-26 -
Dado - 立方体模型2024-03-24 -
NA Miata车灯遮光条折叠机构顶盖2024-04-15 -
超越IPD板2024-05-03