刀片防护罩

Blade Cover

2024-04-16 21:19:19

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发货），感谢理解带宽压力

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

I designed this as a generic blade cover for our kitchen knives. some smaller knives might might not hold as well, but you can adjust as necessary. The cover is 7.5 inches long by 1 inch high.

I printed it on end so that I did not need to enable supports. In my proof of concept print that was only 1/2 inch long, I printed it on it's side with supports enabled, but they were really difficult to remove. The final product printed perfect on end; however, I would make sure that the table and floor that your printer is on does not have any movement. Otherwise, I could see this print going badly.

The print took about 2.5 hours per blade cover on my Bambu Lab P1P printer.

Print Settings

Printer brand:
Bambulabs
Printer:
Bambu P1P
Supports:
No
Filament brand:
Bambu Lab
Filament color:
green
Filament material:
PLA
Notes:
I just used Basic PLA for this print.

Post-Printing

How I Designed This

Designed using SketchUp 2017, exported as DAE, then used https://imagetostl.com/convert/file/dae/to/stl to convert to STL, then imported into Bambu Studio for the print. I'm too cheap to pay for SketchUp so this was my work-around.

刀片防护罩

朋友，你觉得上面这个模型，属于下面的哪个分类？