PadelVR Quest3适配器

PadelVR Quest3 adaptor

2024-04-16 22:18:45

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

This is a print that allows you to use the Meta Quest 3 with the PadelVR padel adaptor. There are two models included but you only need one depending on if you are left or right handed.

To use it, first screw it onto your padel adaptor and then insert the controller. You must press the grip button on the side of your quest controller to insert or remove the controller.

Print Settings

Printer brand:
Prusa
Printer:
I3 MK3S
Rafts:
No
Supports:
No
Resolution:
0.2
Infill:
20
Filament brand:
Real Filament
Filament color:
Black
Filament material:
PETG
Notes:
Print with no supports in PETG for best results. You can add a 5mm brim if needed. The first couple of times you insert the controller, it will be a tight fit.