Mop Handle to Acme Broom Handle Adapter

2024-04-17 00:31:48

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

This is a remix, thank you to the original designer because I could not figure out how to design Acme threads in Fusion 360.

I needed a new handle for my shop broom. I had an old mop handle that used a spring clamp design to hold a disposable cotton mop head. After removing the clamp I had a nice, long handle with two holes ready to accept an adapter. The through bolts are M6x50mm but 45mm bolts might work.

I printed the threads at 100% infill for strength and the rest of the body at 25%. Sliced using PrusaSlicer and printed out of HT-PLA+. So far it has held up fine.

I have included my config file for PrusaSlicer. Print the big end on the build plate, you should not need any supports.