AOS UL7 TPU支架 | 空气处理单元O3 | TBS Crossfire多样性版本 | 警报装置

AOS UL7 TPU Mounts | Air Unit O3 | TBS Crossfire Diversity | Beeper

2024-04-17 02:40:43

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发货），感谢理解带宽压力

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

AOS UL7 TPU支架 | 空气处理单元O3 | TBS Crossfire多样性版本 | 警报装置

Summary

Hello there,

i designed some TPU Mounts for differtent things.
First the mount for the O3 Air Unit. You screw down the four seperate bottom parts with inserted brass sleeve. Watch out there is on for the side with the USB-C Port. The top part you just lay on the air unit and than put the frame together. I designed it rather slim so there is some airflow while flying next to the air unit.

I desiged two antenna holders so that the two antennas are exactly in an angle of 90 degrees to each other. The side antenne is rotated 20 degrees so it is about 0 degrees while flying. The idee behinde this is explained on this page:https://team-blacksheep.freshdesk.com/support/solutions/articles/4000101963-antenna-orientation#:~:text=The%20receiver%20antenna%20of%20the,even%20on%20high%20bank%20angles.&text=For%20the%20Micro%20RX%20you,them%20in%20a%20straight%20line.

The mount for the beeper is mounted on the standoffs has holes for camera cabels and beeper cable. Also some holes for air flow.

The mount for GPS Unit:
https://www.thingiverse.com/thing:6322526

Arm TPU Bumper:
https://www.thingiverse.com/thing:5990198

TBS Crossfire Diversity Mount 30x30mm:
https://www.thingiverse.com/thing:5341144

If you have any questions about this build let me know it in the comments.