克雷拉蒂 K1 活性炭空气净化滤网
CREALITY K1 ACTIVATED CHARCOAL AIR FILTER
2024-04-17 05:52:40
使用说明
- 所有模型资源均由用户上传分享，内容来源于网络公开资源
- 侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
- 模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们
关于费用
我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！
扫码手机访问
抖音私信 @jobsfan
Summary
CREALITY K1 ACTIVATED CHARCOAL AIR FILTER
FEATURES
- Only 3 objects to print.
- No supports needed.
- Accepts 4mm Charcoal pellets OR Charcoal filter if you cut your own.
- Snap press together, no glue needed
- Cavity is roughly 57x60x19 if you want to cut to fit a charcoal filter pad.
- Snug fit thanks to tabs with friction bulges.
- Tight connection; air will flow though and not escape out the sides
INSTRUCTIONS FOR ACTIVATED CHARCOAL PELLETS
- Snap FILTER SCREEN on MAIN BODY
- Fill with 4mm activated charcoal pellets
- Cover with COVER LID
- After filling, shake to settle pellets to make room for more. Air will flow fine through a full chamber of pellets.
INSTRUCTIONS FOR ACTIVATED CHARCOAL FILTER PAD
- Cut 60x60 square (you may add more than one square or fold over a 60x120)
- Put filter pad into cavity of MAIN BODY (you can squish in the corners or round them off)
- Snap FILTER SCREEN on MAIN BODY
- Cover with COVER LID
Tags
朋友，你觉得上面这个模型，属于下面的哪个分类？
必须全中文，且长度不超过15
相关内容
联系我们
邮箱: 289047960@qq.com
热门推荐
-
ODCON1 3D打印枪壳（Gun4IR项目，NAMCO GunCon45风格）2023-03-26 -
Mobula 6盒3D模型2024-01-17 -
橙色PI 3B 仪表盘安装架3D模型2024-03-21 -
升级杠杆式加油系统：适用于Jimny 2019 LHD2024-04-22 -
超清乌龟鱼缸2024-05-04
最热下载
-
ODCON1 3D打印枪壳（Gun4IR项目，NAMCO GunCon45风格）2023-03-26
-
通用型1/10比例底盘 - DKS基础款2023-03-26 -
Flex Dino钥匙链2023-03-26 -
Gun4IR 光枪侧边按键改装模块｜3D打印机械开关支架2023-05-23 -
巴黎卢浮宫的三圣母像2025-07-16
最新模型
-
用于加长杆的戴森配件支架2025-07-17 -
鞋撑2025-07-17 -
私密羞羞娱乐骰子2025-07-15 -
真实玩偶 / 镶有凸圆形玻璃参数的眼睛2025-07-15
