Coyote 火焰喷射器 30mm瞄准镜支架
Coyote cannon torch 30mm scope mount
使用说明
- 所有模型资源均由用户上传分享，内容来源于网络公开资源
- 侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
- 模型将通过邮件发送（5分钟内自动发货），感谢理解带宽压力
关于费用
我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！
扫码手机访问
抖音私信 @jobsfan
Summary
Needed to mount this beast of a torch to my scope without having a big cantilevered stress on it so this is what I came up with, mounts very firmly and doesn't slide around at all even when you bump the rifle, and it should be perfectly in line with the scope.
Requires a M6x50mm and M6x60mm bolt and nuts (or just two 60mm but the bolt will stick out a bit on the rear mount), insert a pause print on the layer for each mount where it closes up the slot for the nut and then insert the nut firmly, you may need to give in a little tap with something hard to get it seated flush.
Printed with 6 perimeters, 7 top and 6 bottom layers at 0.3mm layer height for optimal strength.
License
Coyote cannon torch 30mm scope mount
by samohtxotom is licensed under the Creative Commons - Attribution - Non-Commercial license.
相关内容
联系我们
最新模型
-
MW4 Madcat MKII 3D模型2024-05-08 -
金格龙kp3s风道适用于红蜥蜴2024-05-08 -
惠普712扩展槽盖固定架用于SD卡扩展线2024-05-08 -
简约墙面键帽展示架2024-05-08 -
并列夹紧器2024-05-06
最热下载
-
三维打印可全制作转盘2023-03-26 -
凯弗·鬼魂追踪者2024-01-18 -
红米手表4号充电基座2024-03-15 -
Wolf系列手机支架2024-03-26 -
塑料扣（3D打印无需支撑设计）2024-05-08