ALU Ultimarc AimTrak 传感器支架清洁安装

ALU Ultimarc AimTrak Sensor Mount Clean Install

2024-04-17 23:06:21

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

Install your AimTrak sensor to your ALU with an OEM look.

This is a re-work of mcsterls' AimTrak lightgun bracket for the AtGames Legends Ultimate (ALU) gaming console. The original bracket and bezel can be found here - https://www.thingiverse.com/thing:4689305.

I had trouble calibrating both guns with the above sensor bracket. After using a laptop to troubleshoot the issue, I found the angle of the sensor was off and the guns couldn't see the sensor for the bottom 3-4 inches of screen.

With this bracket and the original bezel, the guns calibrate perfectly and works well for the adults and children in the home. Looks like OEM once done!

I used two types of double sided tape for this project.
Bezel (optional - I already had this) - https://www.amazon.com/gp/product/B0817HZN4L
Bracket and other components - https://www.amazon.com/gp/product/B07YB1ZXG6?th=1

*Calibration tip: Don't even bother with the built in ALU AimTrak calibration tool. This isn't needed because the calibration settings are on the gun, not the ALU. I found it much easier to calibrate with a laptop using the AimTrak utility. This allows easy sensor bar troubleshooting and you can see the calibration settings.

ALU Ultimarc AimTrak 传感器支架清洁安装

朋友，你觉得上面这个模型，属于下面的哪个分类？