PS95 号角式扬声器

PS95 Blow Horn Speaker

2024-04-18 11:33:19

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

I modified the base file to fit Dayton Audio PS95-8 drivers (https://www.amazon.com/dp/B00Q3M9852?psc=1&ref=ppx_yo2ov_dt_b_product_details). I have also included a dxf file if you want to mount the speaker under a shelf or ceiling. The top portion of the file was thickened so that screws can be screwed in on the top.

I highly recommend pre taping the speaker mount holes before securing the driver in place. This can be done by simply taking a M4 screw and screwing it in fully, BUT NOT TIGHTLY, into each of the four holes before securing the driver. Mine cracked slightly but did not hinder the performance of the speaker.

You will need 4 M4 Screws that are longer than or equal to 10mm.