HF40规则刻度仪器 - F360型号

Marking Gauge for HF 40" Rule - F360

2024-04-18 11:34:07

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

This remix is designed for the 40" Harbor Freight aluminum rule. While I did completely draw this model in Fusion 360, it is heavily influenced by this model https://www.thingiverse.com/thing:6550203 created by https://www.thingiverse.com/stenokit/designs.

Along with using an M5 brass threaded insert instead of a captured nut, I also added a tension pad to prevent damage to the rule. Install the insert from the back side to lessen the chance it will be pulled out under tension. The knob has a modeled M5 thread that might need to be chased with a tap. Screw the SHCS onto the knob and snug up tightly. It will likely not need any glue, but a drop of CA can be used if necessary.

I have provided Fusion 360 mile with User Parameters for the ruler width and thickness if you'd like to use a different ruler. I did not provide User Parameters for any other dimensions, but the full timeline is there so changes can easily be made. I also included a STP file for other CAD programs.

M5 x 5.8 Threaded Insert - https://www.amazon.com/dp/B08T9W17CR
M5 x 12 Socket Head Cap Screws - https://www.amazon.com/gp/product/B07NTYF2FZ/?th=1