转动骰子模型：5×3毫米磁铁与Byseven品牌改进版Dice

Spinning Dice with 5x3mm magnets and improved "Dice" from "Byseven"

2024-04-19 04:30:31

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

supports for printing the Top-Caps with the white arrows in 2 colours, with fillament change during the print, required to print the pieces upright and therefore it needed supports.

I used 3x5mm magnets instead of 2x5mm because i already had 3X5mm magnets at home.

I also used the remixed Alternative Print Setup file by "byseven" because the original "Dice" is not centered and also for easyer printing with the seperate pin you have to insert afterwards.

Printed verry small Antracite discs (Dia 2.5 x Height 1.5mm) to glue in the holes that represent the numbers.