蓝吉力Rocky磨片载体转插座适配器

Rancilio Rocky burr carrier to socket adapter

2024-04-19 05:26:26

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

The adjustable burr carrier in the Rancilio Rocky needs to be spun in and out many times for burr alignment, and normally this has to be done by hand while trying to not cut your hand on the metal chassis.

The inside of the carrier has a tri-petal shape where the back of the burr can be seen. This printable adapter can be used to spin the carrier with an external tool such as a socket wrench or driver, saving your hands.

The socket size is 7/8", which I used since it is the largest socket in my MasterCraft socket set here in Canada. Perhaps 13/16" would have been a better choice, since it seems more common. There just has to be enough clearance for the protruding 12mm motor shaft nut.

The socket size may be adjusted in the scad file ("udf", upper diameter flat, variable). I measured between two flats within my socket to specify this size, but in theory the measurement is the socket size in millimeters. This is scaled by cos(30) to get the 6-sided cylinder diameter from the flat-to-flat diameter.

Worked well for me!

Simon-

Print Settings

Printer:
Homemade Delta
Rafts:
No
Supports:
No
Resolution:
0.2mm
Infill:
50%
Filament brand:
Hatchbox
Filament color:
Copper
Filament material:
PLA
Notes:
Probably could print with PETG or something stronger than PLA, but PLA seemed to work fine for me.