608型轴承注塑模具

608 Bearing Priming Jig

2024-04-19 05:26:26

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

I upscaled the "Thin Spinner" to 100.47% and connected 4 of them with a thin stretched cube and used those to hold the bearings. This is the Bearing Primer

Took the NewNub stl from the TriTru Spinner and stretched it out and cut off the bottom 1/4th. This is the handle to be used with the primer. You can also attach it to your drill for faster priming, instead of hand spinning.