马自达3Skyactiv发动机油滤漏斗

Funnel for Mazda 3 Skyactiv engine oil change

2024-04-19 08:02:57

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发货），感谢理解带宽压力

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

This is what you've been looking for on all the 3D parts forums. You just want a better funnel when changing the oil in your Skyactiv engine on your Mazda 3 because standard funnels don't stand still.

For some reason, Mazda thought it was a good idea to have the oil filler tube not vertical. And then they just added that useless engine cover to create extra issues and make oil filling even more miserable.

Fear not, I've got you covered with this specially designed funnel that fits just right into the oil filler tube and stays there. It does not touch the engine cover and stays put because it is inserted into the oil filler tube just far enough, not too far so that it blocks the flow of fresh oil going into your magnificent Skyactiv engine. And yes, the geometry takes into account that there are two little pieces of sh..., I mean plastic that are used to lock the oil cap in place.

So go ahead and indulge yourself, print this beautiful, awesome, well engineered piece of technology and save yourself 23 seconds of work the next time you do an oil change on a Skyactive engine. And the time after that, and for as long as you own that car. It's the gift that keeps on giving!

AFAIK this funnel should work on all 2.0-liter Mazda Skyactiv engines. For reference, mine is a 2017 model year. If your oil cap is the type that "clicks" on in a single turn (no threads), this funnel should fit.

Edit: Yes, the top flange is pretty thick. That's because the parts tends to break there when you try to remove it from the bed.

Print Settings

Printer brand:
Prusa
Printer:
I3 MK3S
Rafts:
Yes
Supports:
No
Resolution:
0.3 mm
Infill:
10%
Filament brand:
Sunlu
Filament color:
Blue
Filament material:
PLA
Notes:
You can also print at 0.2 mm for a better finish, just takes longer to print (obviously!).